We replace all types of old hot water replacement systems or upgrades to new systems.
It’s always safer to get the job done expertly by fully trained, reliable professionals. Drainmaster plumbers visit your home and safely change over electric, gas or install or solar hot water systems. You can trust that a job is carried out professionally when you choose Drainmaster.

At home or at work when you are without hot water it makes it difficult to function. You need your hot water system back up and running as quickly as possible.
Call the Drainmaster hotline for any emergency hot water repairs and we will be onsite to your Sydney or Central Coast location same day. At Drainmaster we commit to providing a full repair service for your hot water systems which includes guaranteed labour and warranties on parts.

As with all mechanical equipment regular servicing of your hot water system will reduce the risk of emergency breakdown and larger issues down the track.

• We recommend that you replace the Anode of your hot water system every 5 years
• The anode is a softer alloy than the cylinder and all corrosion will occur at the Anode and not your cylinder
• Every enamel (glass) lined mains pressure hot water tank is fitted with either 1 or 2 sacrificial anodes, which protect the tank from corrosion

"The Anode installed in your hot water heater will slowly dissipate whilst protecting the cylinder"

• Your hot water tank will last longer
• You will save money on emergency repairs if you regularly service your hot water heater
• You will save money on electricity or gas if your hot water heater is operating efficiently and at its optimum.

The Temperature and Pressure Relief valve (TPR) must be replaced at intervals not longer than 5 years. This valve is not serviceable but should be operated and checked regularly by following the below steps carefully. This valve is designed to release a small amount of water when your hot water heater is recovering or if the pressure inside the vessel exceeds the manufacturers safe working pressure.

This is another very important device as it controls the temperature (60-70C) and will also cut off the electricity supply to the element using the temperature cut out device if it senses a high temperature

The thermostat labours hard switching on and off thousands of times over a few years, and needs to be checked for performance every 3-4 years.

Imagine the scenario. The thermostat has failed, your tank is reaching boiling point and your TPR (temperature pressure relief) valve is not working correctly!!!!!

Please let one of our trained service technicians look over it for you and regularly maintain your hot water services. Keeping your home safe and running efficiently.